Morphy Richards Coffeemaker User Manual download pdf (Page 6)

UK Helpline 0844 871 0946 Replacement Parts 0844 873 0712 Ireland Helpline 1800 409 119

will vary. Ensure the filter is

sitting properly in the filter

holder and do not fill above the

mesh line.

4

Close the reservoir lid.

5

Slide the jug into the coffee

maker ensuring it sits correctly

on the hot plate

ﬁ

. The jug lid

must be in place during the

brewing process, otherwise the

non-drip valve

‡

will not open,

causing the filter to flood.

6

Plug the filter coffee maker in at

the wall socket and switch ON.

The LCD display

ﬂ

will

illuminate to show the coffee

maker is working.

7

Press the on/off button to start

the brewing process. The red

power light will glow and the

coffee will start to brew.

8

Hot water will start to flow

through the coffee grounds and

into the glass jug as coffee.

9

When the coffee has been

made, serve as required. The

anti-drip valve will prevent any

remaining coffee dripping onto

the hot plate. Ensure that the

jug is replaced on the hot plate

after serving. While the coffee

maker is switched ON, the hot

plate will keep the coffee warm.

10

Switch off the coffee maker

when the jug is empty or the

coffee is no longer required.

WARNING: The coffee maker

and hot plate are hot and

remain hot for some time

after switching off.

11

Allow the unit to cool.

12

Remove the permanent filter

and empty the used coffee

grounds. Wash the filter

immediately and dry

thoroughly.

Refilling

• Switch off the coffee maker and

allow 3 minutes to cool before

refilling with cold water.

CONTROL PANEL

BUTTONS KEY

ON/OFF

Auto timer

Warmer

Switching on

• When the machine is switched

on, the display will illuminate.

• To set the time, press the

HOUR button. It is a 24 hour

clock with AM or PM denoted.

• Then press the MINUTE button.

To brew at a

pre-set time

• Press the PROGRAM button.

Note: If no buttons are pressed,

the display will revert to the

time display within 10 seconds.

• Press the HOUR button.

• Then press the MINUTE button

to set the desired start time.

• Press the AUTO button (green

light glows).

Note: Press the AUTO button

again to cancel pre-set

brewing.

To brew manually

• Press the ON/OFF button (red

light glows).

Note: Press the ON/OFF button

again to cancel brewing.

Adjustable

warming plate

temperature

• This coffee maker gives you the

option of adjusting the Stay

Warm Setting to slightly reduce

the temperature of the coffee

after it has brewed.

• When brewing the coffee, a

steady orange light will appear

on the ‘warmer’ button. In

order to reduce the Stay Warm

setting, push the ‘warmer’

button once, and the steady

orange light will then blink.

• This setting should be used

when the carafe is half full or

less, to ensure the coffee

quality is maintained.

• The Stay Warm setting will

continue to operate as long as

the unit is ON and will shut off

automatically after two hours.

• When you begin to brew a new

pot of coffee, the steady

orange light will reappear,

indicating the Coffeemaker will

maintain the temperature of the

higher Stay Warm Setting.

A

4

47076 Rev3b:x 13/11/2009 10:43 Page 6

1 2 3 4 5 6

Comments to this Manuals

No comments