Morphy Richards 720020 Manual download pdf (Page 9)

The brass ball weight (16)

The brass ball weight inside the water tank is

attached to the end of the suction hose. The ball

is weighted and designed to freely move around

the water tank depending on the position of the

product. The ball must remain in the water so

steam can be generated whenever the steam

trigger is pressed regardless of the orientation of

the hand-held steamer.

Rinsing the water tank

Regularly rinse the water tank to release any

deposits that have collected on the bottom of the

tank. Only use de-ionised, demineralised or

distilled water (available from most large

supermarkets) and fit the filler cap to allow

vigorous rinsing.

Follow the two maintenance steps below after

every use.

1. Switch the cleaner off and unplug from the

socket. Place immediately on a suitable surface

(eg. tiled floor) where the residual heat/moisture in

the floor nozzle/cloth will not affect the surface.

Wait until the cleaner has cooled down

completely.

2. Empty the water tank (14) by removing the filler

cap (11) and pouring out the water. Allow the

inside of the water tank to dry out before

replacing the filler cap.

Wrap the cord around the two cord storage hooks

(4/5), rotating the upper storage hook (4) upwards

to secure the power cord (10) in place.

Put all accessories into the accessory bag

(32)

and hang the bag from the upper cord storage

hook.

WARNING: Always unplug the Steam cleaner

from the mains supply before undertaking any

maintenance procedures.

Overall maintenance

Your cleaner is manufactured to withstand normal

day-to-day use, but an occasional wipe over with

a damp cloth will help maintain it. Abrasive

cleaners should not be used.

Cleaning the cloths

The floor cloth (20) and the elasticated utility cloth

(28) can all be machine washed (30ºC max). For

heavy soiling, soak the cloths in warm water and

detergent or a mild stain remover.

IMPORTANT: Do not use bleach or fabric

softener.

Allow to completely dry before storing.

Contact our helpline to purchase replacement

cloths.

Maintaining the attachments

Dirt and blockages should be regularly removed

from the attachments to help prolong their usage.

Maintenance

After use

The water tank

Storage

VC70495MUK Rev2_Instruction Book 19/12/2012 15:52 Page 9

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Morphy Richards 720020 Manual Page 9

Comments to this Manuals

Related products and manuals for Steam cleaners Morphy Richards 720020