Morphy-richards Steam Generator User Manual download pdf (Page 3)

3

Special instructions

• If your steam generator does not work,

check the following points:

Has the temperature control been set to

the required temperature? Is the plug in

it’s socket? Is the plug itself or the socket

faulty? (Check by plugging in another

appliance).

• To prevent damage to the textile being

ironed, follow the temperature guide

carefully. (Test the inside of the hem of the

garment).

• When ironing is complete, remove the

plug from the socket, empty any

remaining water from the tank, and allow

to cool before storage.

• If you drop or severely knock your steam

generator, this could cause internal

damage even if the outside appears

alright. Have it checked by a qualified

electrician.

• The temperature of accessible surfaces

may be high when the appliance is

operating.

WARNING: Do not use the product on a

surface which could be damaged by heat

or steam such as a worktop or a polished

wooden surface.

Electrical requirements

Check that the voltage on the rating plate

of your appliance corresponds with your

house electricity supply which must be A.C.

(Alternating current).

For appliances with fitted plug.

If the socket outlets in your home are not

suitable for the plug supplied with this

appliance, the plug should be removed and

the appropriate one fitted.

WARNING : The plug removed from the

mains lead, if severed, must be destroyed,

as a plug with a bared flexible cord is

hazardous if engaged into a live socket

outlet.

Should the fuse in the 13 amp plug

require changing, a 13 amp BS1362 fuse

must be fitted.

WARNING: THIS APPLIANCE MUST BE

EARTHED.

Instructions for use

Symbol

(120

o

C Max) Cool

(160

o

C Max) Warm

(210

o

C Max) Hot

Control knob

positions

Do not iron

at all

Fabric

Nylon, Acetates

e.g. Acrilan

Courtelle, Orlon

Triacetates, e.g.

Tricel/Polyester

Wool, Polyester

mixtures e.g.

Polyester/Cotton

Cotton, Linen

Rayon, Rayon

mixtures,

e.g. Rayon/Linen

Ironing

Iron on wrong side

if moisture required

use damp cloth

(Not Acetate)

Fabrics requiring this

setting usually require

steam pressing for heavy

cotton, denim etc.

Steaming

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those

of the International Textile Care Labelling Code.

42271 rev4 30/7/08 15:56 Page 3

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments