Morphy Richards IB70540 User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Then switch the steam off and wipe the
moisture off the glass from top to bottom
u
sing the rubber squeegee. Wipe the
rubber squeegee and the lower edge of
the window. Dry after every strip.
IMPORTANT: Glass surfaces can be
shattered by the sudden application of
excessive heat. Warm glass surfaces first
from a distance of 20-25 cm. Continue at a
distance of 10-15 cm.
Professional iron
È
(certain models only)
The high steam professional iron
produces up to six times more steam than a
normal domestic iron and is up to four times
faster.
Do not stand the iron on its end, always
place it with the soleplate down on the
iron pad
Í.
1 Firmly insert the plug of the ir
on into the
hose inlet of the cleaner until it locks in
place.
2 Set the iron temperature knob to the
correct temperature for the fabric to be
ironed.
3 Switch the steamer on by pressing the
on/off switch. The orange power light on
the steamer will illuminate and the orange
warming-up light on the iron will
illuminate. The light on the iron will go off
when the iron has reached the desired
temperature (and cycle on-and-off during
operation to show that the iron is
maintaining the correct temperature).
4 When the steam is ready for use and the
iron is hot, place your thumb on the large
switch located at the top of the iron, to
release steam.
5 Release some steam away from the
fabric before commencing ironing until a
steady flow of steam comes out.
The iron can be used vertically to ‘steam-
i
ron’ curtains, dresses etc.
Tube park
During use the tubes and nozzle can be
stored in the park position for short
breaks whilst cleaning
T.
Tool storage cart
The cleaner may be used with or without
the storage cart.
Press the button at the rear of the cleaner
and lift to remove the boiler from the cart
U.
The accessories for your steam cleaner
can be neatly stor
ed in the cart.
When replacing the steam cleaner on the
cart put hose inlet end
in first, then with a
firm downward motion push till the button at
the back of cart goes in then out, a click will
be heard.
9
T U
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments