Morphy-richards Cordless hand blender User Manual download pdf (Page 4)

Unpacking your cordless

hand blender

WARNING: Carefully unpack your

hand blender as blades are very sharp.

Wash all parts before first use, see

cleaning instructions page 10.

Assembly

1 Fit the blender body and blender leg

onto the base unit as shown. A

2 Attach the charging adaptor plug into

the socket on the base unit. B

3 Plug the adaptor into a suitable 13A

socket outlet and switch on.

Charging

1 Attach the blender to the base unit as

described in assembly. The red light will

illuminate to show that the body is

correctly located in the base and that it

is accepting a charge.

• If the red light is not illuminated, lift up

the blender body and relocate in the

base.

• The unit is designed to be left on

continuous charge. The ‘smart’ charger

fully charges and maintains the charge

ready for use. A full charge can be

reached in 3 hours, in normal use

recharging is 1 to 2 hours.

• Leaving the unit on continuous charge is

inexpensive in terms of the amount of

electricity being used.

• When the unit is fully charged the red

light will go out and green will illuminate

to show it is fully charged and

maintained.

IMPORTANT: When new and charging for

the first time or the blender has not been on

charge for a long period the battery will be

discharged.

• The green light may illuminate within 15

minutes, this is a false indication which

is common with discharged batteries.

Switch off at the mains then switch back

on, this will reactivate the charging cycle.

Red light will illuminate to show charging

has started.

• Repeat this procedure if it happens

again. Charging will now revert to normal

and take approx 3 hours to fully charge.

4

B

A

A

48965 Rev 1 13/4/04 3:47 PM Page 4

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments